ASUS P4P800S-X MANUAL PDF
No part of this manual, including the products and software described in it, may be reproduced .. Thank you for buying the ASUS® P4PS-X motherboard!. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE. P4PS-X ASUS Motherboard mainboard chipset základní desky Slot Socket information.
|Published (Last):||7 August 2014|
|PDF File Size:||19.23 Mb|
|ePub File Size:||5.89 Mb|
|Price:||Free* [*Free Regsitration Required]|
Make sure to unplug the power supply before adding or removing DIMMs or other system components. Install an expansion card following the instructions that came with the chassis. Product warranty or service will not be extended if: If all the necessary files are found in the floppy disk, the BIOS update process continues.
The problem must be with the CMOS battery.
If you are using any other operating systems, disable the Hyper-Threading Technology item in the BIOS to ensure system stability and performance. Insert a floppy disk that contains the original or the latest P4800s-x file for this motherboard. From the Open box, type D: From your Windows desktop, click on Start, then select My Computer.
3 main menu | Asus P4PS-X User Manual | Page 45 / 70 | Original mode
The LED lights up when you turn on the system power, and blinks when the system is in sleep mode. F10 key can be used for this operation.
Setting to Auto enables mabual LBA mode if the mabual supports this mode, and if the device was not previously formatted with LBA mode disabled. To set a Supervisor Password: The lever clicks on the side tab to indicate that it is locked.
Contact a qualified service technician or your retailer.
Save the BIOS file to a bootable floppy disk. When you remove any chassis component, the sensor triggers and sends a high-level signal to this lead to record a chassis intrusion event. Hi, Please enter the bios check all the settings if all are correct then press f10 save the settings and exit.
The hole near the blue connector on the UltraATA cable is intentional. The functions of the Line Out, Line In, and Microphone jacks change when you select the 6-channel audio configuration as shown in the following table. To display the sub-menu, select the item and press Enter. You can’t post answers that contain an email address. DO NOT place jumper caps on the fan connectors! This 9-pin COM1 port is for serial devices.
ASUS P4P800S-X manuals
Even if you are not prompted to use the Setup program, you may want to change the configuration of your computer in the future. EXE to run the CD. After selecting this option, a confirmation appears.
Select an item manuak press Enter to display the sub-menu. CPU Parameter Recall feature.
It includes brief descriptions of the motherboard components, and illustrations of the layout, jumper settings, and connectors. To clear the supervisor password, select the Change Supervisor Password then press Enter. This motherboard does not support 3. To change the supervisor password, follow the same steps as in setting a user password. If p4p800s-s USB device is detected, the item shows None.
You need to type the exact BIOS file name at the prompt. Discard Changes Allows you to discard the selections you made and restore the previously saved values. About This Guide 1. Mxnual show me this message again. Select an item then press Enter to display the configuration options. We recommend that you do not change the default setting for better OS compatibility. Setting wrong mnaual in the sections below may cause system to malfunction.
This allows you to enable or disable the full screen logo display feature.
When the BIOS update process is complete, reboot the system. It includes brief descriptions of the motherboard components, and illustrations of the layout, jumper settings, and connectors.
Select an item then press Enter to display the sub-menu. That’s the 2nd time i hear that kind of problem. Incorrect field values may cause the system to malfunction. Detailed descriptions of the BIOS parameters are also provided.
Where to find more information Refer to the following sources for additional information and for product and software updates. The User Password item on top of the screen shows the default Not Installed. Page 32 MIDI devices for playing or editing audio files. Write the BIOS file name on a piece of paper. The module has two USB 2. The User Password item now shows Installed.